The dual fuel kit enables the towel rail to be used when the central heating system is not being used, for example during the summer months.
IMPORTANT! Elements must be installed at the bottom of the towel radiator/ radiator.
IMPORTANT! Never dry test an element they must be immersed in water at all times. Dry testing the element will cause damage and invalidate your guarantee.
Note: It is now law that all electrical work carried out in the bathroom is by a qualified electrician in accordance with I.E.E. wiring regulations.
Note: Dual Fuel kits now consist of an element T piece and blanking T piece. Angled valves should be used.
The entire SBH range of radiators is offered with an "electric only" conversion option. The radiator is filled with a water based inhibitor and an electric element on the left hand side of appropriate wattage. The radiator is tested at full temperature before being supplied to customers. The radiator arrives ready for installation by a qualified electrician.
All elements heat the contents of the radiator to 80 degrees C, thus providing output in excess of those stated in our literature.
No radiator valves are required with electric only radiators as they cannot be connected to a central heating system. Note: It is now law that all electrical work carried out in the bathroom is by a qualified electrician in accordance with I.E.E. wiring regulations.